Instant cost estimates for brick fences across Brisbane, Ipswich, Logan, Redlands, Moreton Bay, Gold Coast and Sunshine Coast.
Calculate Brick Fence CostA brick fence is one of the most durable and visually appealing boundary options available to Brisbane homeowners. Built from clay bricks laid by experienced bricklayers, a brick fence offers superior strength, privacy, and noise reduction compared to timber or Colorbond fencing. It also adds significant street appeal and can increase the value of your property.
Brick fences are commonly used for front fences, boundary walls, and feature walls. They can be built as a single-face wall with one finished side, or a double-face wall where both sides are fully finished. Double-face brick fences are ideal for shared boundaries where the neighbour also sees the wall.
The most common brick used in Brisbane is the standard 230mm x 110mm x 76mm clay brick. The wall thickness depends on whether the fence is single face or double face. Single face brick fences are typically 110mm thick, while double face fences are 230mm thick.
Brick fences can be built in a range of styles including:
Brick fence costs in Brisbane are typically calculated per square metre and depend on the brick type, wall height, footing requirements, pier spacing, and site access. As of 2026, single face brick fences generally range from $280 to $420 per square metre supply and install, while double face brick fences range from $380 to $520 per square metre.
Additional costs include concrete footings, pier construction, excavation, rendering, painting, and gate installation. A brick fence with a letterbox or mailbox built into the front fence will also add to the total cost.
Use our brick fence calculator to get an accurate estimate for your specific project. You can select wall height, length, brick type, piers, and mailbox options to generate a detailed quote.
Before building a brick fence in Brisbane, it is important to check local council regulations. Generally, front fences are limited to 1.8 metres in height, and side and rear boundary fences can be up to 2.0 metres. Fences over these heights may require building approval.
Retaining walls over 1.0 metre in height often require engineering certification. If your fence is also retaining soil, you should consult a structural engineer or licenced builder to ensure compliance with the Queensland Building and Construction Commission (QBCC) standards.
With proper footings and quality workmanship, a brick fence can last 50 years or more. Clay bricks are resistant to termites, fire, and rot. The weakest points are usually the mortar joints, which may need repointing after 20 to 30 years depending on exposure to weather.
BrickQuote Pro provides brick fence cost estimates for Brisbane, Ipswich, Logan, Redlands, Moreton Bay, the Gold Coast, and the Sunshine Coast.
Explore our related pages for block fences, front fences, boundary walls, brick mailboxes, and brick piers.
Single face brick fences cost approximately $280 to $420 per square metre, while double face brick fences cost $380 to $520 per square metre. The total price depends on height, length, brick type, and extras such as piers and mailboxes.
For a 1.8 metre high single face brick fence, expect $500 to $750 per linear metre. For a double face fence, $680 to $940 per linear metre.
Fences under 1.8 metres front and 2.0 metres side/rear generally do not need approval in Brisbane. Higher fences, retaining walls, or fences near easements may require approval.
A typical 10 metre brick fence takes 2 to 4 days including footings, bricklaying, and cleanup. Larger or more complex fences may take longer.
Use our instant calculator to estimate your brick fence cost in seconds.
Start Your Quote